Factory Links KTM rear wheel bearing and seal kit for selected KTM, Husqvarna, GasGas and Husaberg models. Marine-greased bearings and double-lip seals help protect a compatible hub in wet, muddy off-road conditions. Check the exact model-year fitment before ordering.
$59.95
The Factory Links KTM rear wheel bearing and seal kit services the original rear hub on the compatible KTM, Husqvarna, GasGas and Husaberg motorcycles listed below. Designed for off-road use, it gives Australian enduro, trail and motocross riders a matched bearing and seal replacement for a worn or contaminated hub.
• Deep-groove ball bearings support smooth wheel rotation.
• Marine-grade grease helps resist moisture and corrosion.
• NBR double-lip oil seals help protect the hub from water, mud and grit.
• Supplies the bearings and seals for one compatible wheel.
Ideal For
Use this KTM rear wheel bearing kit during routine hub maintenance or when inspection confirms rough bearings, excess play or damaged seals. It suits the original hub specification on the listed bikes, including the compatible Husqvarna, GasGas and Husaberg applications.
Specifications
• Brand: Factory Links
• Series: OEM Series
• Contents: Two bearings and two oil seals, as pictured
• Rear-hub application: Selected KTM, Husqvarna, GasGas and Husaberg models
• Wheel, hub, axle and wheel spacers are not included
Installation & Care
Check the bearing seats, axle and spacers before installing the new parts. A worn spacer surface can damage a new seal, so inspect the contact area carefully. Use a bearing driver or press that supports the correct race and follow the motorcycle workshop manual. Do not hammer through the rolling elements. Reassemble the original spacer arrangement, fit the seals squarely and tighten the axle to the specified torque. Check for smooth rotation and free play before riding. Use a qualified motorcycle technician if you are unsure.
Bike Fitment — Rear Wheel
KTM
• 125 SX: 1993–2022; 250 SX: 1994–2022; 150 SX: 2009–2022
• 250 SX-F: 2005–2022; 350 SX-F: 2011–2022; 450 SX-F: 2007–2022
• 125 / 200 EXC: 1998–2016; 250 / 300 EXC, including applicable TPI variants: 1998–2023
• 150 EXC: 2022–2023; 250 EXC-F: 2015–2023; 350 EXC-F: 2012–2023
• 450 EXC / EXC-R: 2008–2016; 450 EXC-F: 2017–2023; 500 EXC: 2012–2016; 500 EXC-F: 2017–2023
• 125 XC: 2021–2022; 150 XC: 2010–2015; 200 XC: 2006–2009; 250 / 300 XC, including TPI: 2006–2022
• 250 XC-F: 2007–2022; 350 XC-F: 2012–2022; 450 XC-F: 2008–2022
• 150 XC-W / TPI: 2017–2023; 200 XC-W: 2006–2016; 250 / 300 XC-W / TPI: 2006–2023
• 250 XCF-W: 2007–2022; 350 XCF-W: 2012–2022; 450 XCF-W: 2017–2023; 500 XCF-W: 2021
• 85 SX, both wheel sizes: 2003–2024; 105 SX: 2004–2011; Freeride 250 R: 2014–2017
Selected legacy 144, 360, 380, 400, 505, 520, 525 and 530 models are also manufacturer-listed. Check the exact model designation and year with CCES before ordering for a legacy application.
Husqvarna
• FC 250 / 350 / 450 and TC 125 / 250: 2014–2022
• FE 250 / 350 / 450 / 501: 2014–2023; applicable FE 350 S / 501 S: 2015–2023
• TE 125: 2015–2016; TE 150 / 150i: 2017–2023; TE 250 / 300, including injection variants: 2014–2023
• FX 350 / 450: 2017–2022; TX 125: 2017–2019; TX 300 / 300i: 2017–2022
• TC 85, both wheel sizes: 2014–2024; FS 450: 2019–2022; FR 450 Rally: 2017–2022
GasGas
• EC 250 / 300 and EC 250F / 350F: 2021–2024; EC 450F / 500F: 2024
• EX 250: 2022–2024; EX 300 / 250F / 350F / 450F: 2021–2024
• MC 125 / 250 / 250F / 350F / 450F: 2021–2024; MC 85, both wheel sizes: 2021–2024
• MC 250F Factory Edition: 2023; MC 450F Troy Lee Designs: 2022; RX 450F Replica: 2023–2024
Husaberg
Selected FC 450 / 501 S / 550 (2004–2005); FE 250 / 350 / 501 (2013–2014), FE 390 (2010–2012), FE 450 (2005–2014), FE 550 E (2007–2008), FE 570 E (2009–2010) and FE 650 (2004–2008); FX 450 (2010–2011); TE 125 (2012–2014), TE 250 / 300 (2011–2014). Confirm the exact variant before ordering.
Fitment Notes
Match the model year, hub and seal specification, especially on special editions or bikes with replacement wheels. This KTM rear wheel bearing kit must not be selected by engine capacity alone. Later full-size KTM and Husqvarna hubs, and later GasGas applications, use different kits. The 2025-onward 85 cc hub generation is excluded from this listing because its OEM seal specification differs from the earlier hub. Registration year can differ from model year.
Find parts for your bike here.
Additional Front Wheel Applications
Factory Links also lists this part for the FRONT wheel on selected BMW HP4, K1200, K1300, K1600, S1000R, S1000RR and S1000XR models, plus Kawasaki KLE1000 Versys LT (2021–2024). These are separate, model-specific front-wheel applications. Contact CCES to confirm the exact model and year before ordering for one of these bikes.
Why This Product?
This KTM rear wheel bearing kit replaces the bearings and seals together, so a fresh seal can help protect the serviced assembly. Correct fitment and installation matter as much as the new components. Inspect the surrounding hub parts and resolve any damage rather than fitting new bearings into a worn assembly.
Frequently Asked Questions
Does it service both wheels?
No. The supplied parts service one compatible wheel. Most listed off-road applications use it at the rear; the separate road-bike applications above use it at the front.
Are wheel spacers included?
No. The pictured kit contains two bearings and two seals. Replace worn spacers separately.
Will it fit a newer bike with an older wheel?
Check the wheel’s actual hub, spacer and seal specification. The motorcycle model alone does not confirm fitment after a wheel conversion.
