Factory Links rear wheel bearing and seal kit for selected Beta, KTM, Husqvarna and GasGas models. Marine-greased bearings and double-lip seals help protect the rear hub in wet, muddy off-road conditions. Check the model-year fitment below before ordering.
$59.95
The Factory Links rear wheel bearing and seal kit renews the rear hub bearings and seals on the compatible Beta, KTM, Husqvarna and GasGas motorcycles listed below. Built for off-road wheel servicing, it suits enduro, trail and motocross riders across Australia.
• Deep-groove ball bearings support smooth rear wheel rotation.
• Marine-grade grease helps resist moisture and corrosion.
• NBR double-lip rear wheel bearing seals help keep mud, water and grit out of the hub.
• Matched bearings and seals for one compatible rear wheel.
Ideal For
Use this rear wheel bearing kit for routine hub servicing, replacing rough or worn bearings, and refreshing seals after contamination. Check wheel play and rotation during maintenance, especially after wet or muddy rides.
Specifications
• Brand: Factory Links
• Series: OEM Series
• Position: Rear wheel hub
• Contents: Two bearings and two oil seals, as pictured
• Bearing dimensions: 25 × 47 × 12 mm
• Oil seal dimensions: 35 × 47 × 7 mm
• Kit coverage: One compatible rear wheel; hub, axle and wheel spacers are not supplied
Installation & Care
Inspect the hub seats, axle and original spacers before fitting. Use a suitable bearing driver or press and follow the motorcycle workshop manual. Keep bearings square and avoid transferring installation force through the balls. Refit the correct spacers and seals, then tighten the axle to the manufacturer’s specification. Seek help from a qualified motorcycle technician if needed.
Bike Fitment
Beta
• RR 125 2T: 2018–2024; RR 200 2T: 2019–2024; RR 250 / 300 2T: 2013–2024
• RR 350 / 390 / 430 / 480 4T: 2015–2024
• Applicable RR Racing editions within those ranges; RR Race and RR X-Pro 125 / 200 / 250 / 300 2T and 350 / 390 / 430 / 480 4T: 2025–2026
• Xtrainer 250: 2017–2026; Xtrainer 300: 2015–2026
• RX 300: 2021–2025; RX 450: 2024–2025
• RR-S 350 / 390 / 430 / 500: 2017–2024
Selected earlier Beta applications are also manufacturer-listed: RR 350 (2011–2014), RR 400 (2011–2014), RR 450 Factory (2011–2014), RR 498 (2012–2014), RR 520 (2010–2012), RS 390 (2015–2016), RS 400 (2014) and RS 500 (2015–2016). Confirm your exact model before ordering.
KTM
• 125 / 250 / 300 SX and 250 / 350 / 450 SX-F: 2023–2026
• 150 SX: 2025–2026
• 150 / 250 / 300 EXC and 250 / 350 / 450 / 500 EXC-F: 2024–2026
• 125 / 250 / 300 XC and 250 / 350 / 450 XC-F: 2023–2026
• 125 / 150 / 250 / 300 XC-W and 450 XCF-W: 2024–2026
• 450 SMR: 2023–2026
Husqvarna
• TC 125 / 250, FC 250 / 350 / 450, TX 300 and FX 350 / 450: 2023–2026
• TE 150 / 250 / 300 and FE 250 / 350 / 450 / 501: 2024–2026
• TE 125 and TC 150 / 300: 2025–2026
• FS 450: 2023–2025; FR 450 Rally: 2023–2025
GasGas
• MC 125 / 250 / 250F / 350F / 450F: 2025–2026; MC 150: 2025–2026; MC 300: 2025
• EC 250 / 300 / 250F / 350F / 450F / 500F: 2025–2026
• EX 250 / 300 / 350F: 2025–2026; EX 250F / 450F: 2025
Fitment Notes
These are model years, not registration years. Fitment is for the original compatible rear hub; aftermarket wheels or hub conversions may require different bearings and seals. Special editions should be checked against their original hub specification. Do not select this kit by engine size alone. Earlier KTM, Husqvarna and GasGas models can require a different rear wheel kit.
Find parts for your bike here.
Why This Product?
This rear wheel bearing kit replaces worn bearings and tired seals together, giving the serviced hub a fresh start. Choose the kit that matches your bike and hub, and inspect the surrounding parts so damaged spacers or bearing seats do not shorten the life of the new components.
Frequently Asked Questions
Does this kit service both wheels?
No. The listed contents service one compatible rear wheel.
Are wheel spacers included?
No. This kit contains the two bearings and two seals shown in the main photo. Inspect and reuse serviceable original spacers, or replace them separately.
Can I use it with aftermarket wheels?
Only when the wheel manufacturer confirms the same bearing and seal specification. Bike fitment alone does not confirm a modified hub.
View Factory Links product information.
